Product Description
When selecting the loudspeaker the used decoder type is important. Depending on the decoder, different loudspeakers can be used as follows:
LokSound V4.0, LokSound micro V4.0 and LokSound V4.0 M4 decoders need the new speaker with an impendance of 4 Ohms. With the present 100 Ohms loudspeakers you would hardly hear anything.
Conversely, you must never use the new 4 Ohms speakers with the previous LokSound V3.5 decoder. The decoder could be destroyed! When the decoder is replaced, the speaker must! be changed as well.
A very important part of the LokSound system is the speaker. Therefore, we only use specially developed loudspeakers geared to the sound decoder. Here we recommend the following old saying, the bigger the speaker, the better the sound. As such, we offer loudspeakers in various sizes, one of them will surely fit into your loco. Should there not be enough space, you can also install the speaker in a ‘ghost waggon’ directly behind the loco.
Another crucial accessory is the sound chamber. This helps create the necessary sound pressure for the speaker´s membrane and comes with most loudspeakers.
If you are not sure about which loudspeaker fits into your loco we generally recommend to open the loco and measure the dimensions with a ruler.
Since model railway manufacturers often tend to change (tacitly) the inner modifications of their locos we are not able to make recommendations in general. Therefore rely on your own observations!
You must never use the new 4 Ohms speakers with the previous LokSound V3.5 decoder. The decoder could be destroyed! When the decoder is replaced, the speaker must! be changed as well.
Overview sound chamber depths
As mentioned above, the sound chamber is a crucial accessory for the speaker. It helps creating the necessary sound pressure for the speaker´s membrane. Here you will find an overview of the respective sound chamber depth of each speaker available from ESU.
Product description